Wireless Router
Trouble Shooting
3
You will see the count down of the system rebooting
5)
The router will restart and set as a repeater now.
6)
As repeater, RNX- EasyN4’s DHCP function will be disabled. So you will need to
manually set your computer’s IP in order to login to the management page.
Windows XP:
Step 1 Click on Start > Control Panel > Network and Internet Connections >
Network connections.
Step 2 Right-click on the Local Area Connection which represents your network
card and select Properties.
Highlight Internet Protocol (TCP/IP) and click Properties.
Click Use the following IP address and enter an IP address that is on the same
subnet as the LAN IP address on your router. Example: If the router’s LAN IP
address is 192.168.0.1, make your IP address 192.168.0.X where X is a number
between 100 and 200. Make sure that the number you choose is not in use on the
network.
Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).
7)
Open your web browser and type in 192.168.0.1 on the address bar. At the login,
enter your username and password (default username: admin, password: admin).
8)
You will see the configuration homepage under ‘‘REPEATER’’ mode now.
