Wireless Router
Trouble Shooting
1
How do I configure my RNX-EasyN4 as a Repeater?
Repeater Mode uses WDS (Wireless Distribution System).
This Repeater mode will help to extend your current Wireless Router’s signal range
through appears to bridge and accept wireless clients at the same time (unlike
traditional bridging). It should be noted, however, that throughput in this method is
halved for all clients connected wirelessly.
1)
Link the Cable between your computer and RNX-EasyN4’s LAN port.
2)
Open your web browser and type the IP address of the RNX- EasyN4 which you
want to use as the repeater. The default IP address is 192.168.0.1. At the login,
enter your username and password (default username: admin, password: admin).
3)
Through ‘‘Wizard’’ selection, you can select to set this RNX- EasyN4 to run at AP
Repeater Mode.
