6
7
Nano USB Wireless Adapter
Nano USB Wireless Adapter
User Manual
User Manual
RNX-AC600NUB
RNX-AC600NUB
2.2 Connect to Wireless Access Point
To use wireless network, you have to connect to a wireless access point first.
You can either use Client utility (comes with network card driver), or Windows
Zero Config utility (comes with Windows operating system).
2.1.5
Once the installation is finished the computer will be asked to reboot. You can
click
‘Finish’
and reboot the computer to finish the installation of driver files.
2.1.6
A new icon will appear near the clock of system tray:
Left-click the icon will launch wireless network configuration utility, and you can
right-click the icon to show the quick menu of configuration utility. This icon also
uses different color to show the status of wireless connection:
Wireless connection is established, good signal reception.
Wireless connection is established, weak signal reception.
Connection is not established yet.
Wireless network card is not detected.
For detailed instructions of wireless network configuration utility,
please see next chapter.
2.2.1 Using Client Utility
1.
Please follow the following instructions to use Client configuration utility to
connect to wireless access point.
Left-click the Client configuration utility icon located at lower-right corner of
computer desktop, and configuration menu will appear:
HERE!
2.
Wireless utility will appear. Click
‘Available Network’
menu to search for
wireless access points nearby.
