Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt
" " " " " " " " " " " " " " " " " /"
RNWD-N9003PCE
/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn"
Ejcrvgt"6"YRU"Eqphkiwtcvkqp"
WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to
an existing network quickly.
If the wireless Router supports Wi-Fi Protected Setup (WPS), you can establish a
wireless connection between wireless card and Router using either Push Button
Configuration (PBC) method or PIN method.
"
Pqvg<"
WPS function is not supported in Windows 7 OS.
First, the WPS software should be installed. Insert the Resource CD into your
CD-ROM drive. To continue, double-click
O{"Eqorwvgt
, and then double-click
the
EF1FXF
drive where the installation CD was placed. Open
P;22REG
folder,
and double-click
yru0gzg
. Then you will see Figure 0-1.
Figure 0-1
Then, please follow the step-by-step instruction to complete the WPS installation.
After that, WPS function can be enabled. Here we will introduce two ways to
configure the WPS.
-35-
