5/8 Port 10/100Mbp Switch
RC405/406 User Manual
7
2.
The Link LED is not lit
Solution:
a.
Make sure the Switch configuration is consistent with the connecting device
b.
Check the cable connections.
c.
Make sure the cable distance between the Switch and other IEEE802.3 compatible network
device should not exceed 100 meter.
3.
Performance is bad
Solution:
a.
Check the full duplex status of the Ethernet Switching. If the Ethernet Switching is set
to full duplex and the partner is set to half duplex, then the performance will be poor.
b.
Make sure the cable between the switch and other IEEE802.3 compatible network
device is Category 5 UTP at 100Mbps operation.
4.
Some stations can not talk to other stations located on the other port
Solution:
a.
Check status of the Link LED to make sure the link is correct.
b.
Make sure that the workstation’s network configuration is correct, modify the network
configuration of workstation if need.
c.
Please reset the switch if need.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com/ for complete warranty information and future support for
your product.
