manualshive.com logo in svg

Rosewill AC600, Руководство пользователя

Поделиться
Скачать
Rosewill AC600 Скачать руководство пользователя страница 8

Wireless Dual Band PCI-Express Adapter

User Manaul

RNX-AC600PCEv3

4

SECTION 2: Installation

2.1 Hardware Installation

Note:

1. Turn off your computer and unplug the power cord from the computer.
2. Remove the metal slot cover on the back of the PC. Keep the screws. Turn to your computer  
  manufacturer for instructions if needed.
3. Insert the PCI-Express adapter into the PCI-Express slot. Make sure that all of its pins have   
  touched the slot's contacts. Once the adapter has been firmly inserted, screw its fastening    
  tab. Then close your PC case.
4. Insert the power cable back into the computer and turn on your computer.

When the hardware has been successfully installed on your computer, you may be prompted by 
the Found New Hardware Wizard (Figure 2-1). Please click "Cancel", then follow the Software 
Installation steps to install Driver and Utility for your adapter.

Figure 2-1 Found New Hardware Wizard in Windows XP

Please install the PCI-Express adapter into your computer before installing the driver from the 
Resource CD.

Содержание AC600





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды