Wireless Dual Band PCI-Express Adapter
User Manaul
RNX-AC600PCEv3
15
This section provides solutions to problems that may occur during the installation and operation
of the Wireless PCI-Express Wi-Fi Adapter.
1. I cannot communicate with the other computers linked via Ethernet in the Infrastructure
configuration.
• Make sure that the PC to which the adapter is associated is powered on.
• Make sure that your adapter is configured on the same channel and with the same security
options as with the other computers in the Infrastructure configuration.
2. What should I do when the computer with the Adapter installed is unable to connect to
the wireless network and/or the Internet?
• Check that the LED indicators for the broadband modem are indicating normal activity.
If not, there may be a problem with the broadband connection.
• Check that the LED indicators on the wireless router are functioning properly. If not, check
that the AC power and Ethernet cables are firmly connected.
• Check that the IP address, subnet mask, gateway, and DNS settings are correctly entered
for the network.
• In Infrastructure mode, make sure the same Service Set Identifier (SSID) is specified on the
settings for the wireless clients and access points.
• In Ad-Hoc mode, both wireless clients will need to have the same SSID. Please note that it
might be necessary to set up one client to establish a BSS (Basic Service Set) and wait
briefly before setting up other clients. This prevents several clients from trying to establish a
BSS at the same time, which can result in multiple singular BSSs being established, rather
than a single BSS with multiple clients associated to it.
• Check that the Network Connection for the wireless client is configured properly.
• If Security is enabled, make sure that the correct encryption keys are entered on both the
Adapter and the access point.
FAQ
