Operation and maintenance manual
Hoof trimming chute operation manual
- 11 von 22 -
Rev.: 01/2022
– We reserve the right to make technical modifications
2.1.3 Detach the hoof trimming chute from the tractor and park it
To park the hoof trimming chute take care of:
WARNING
Drive onto a level parking space.
Secure tractor against rolling (handbrake, brake wedge).
Lower the hoof trimming chute. When parking the hoof trimming chute, make sure
that it cannot tip over or slip, especially if it is placed in an elevated position on
stacks, pallets, etc.
First loosen the upper link chain, then the lower link.
2.2 Transport with hand transport device
The lifting axle incl. the hand transport wheels are
not included in the scope of delivery as standard!
This variant is used exclusively for establishing the
end position of the implement before claw care, not
for general transport over longer distances!
First secure the service arm and cable feed
and swing in the front leg winch!
Engage the ball of the lifting axle in the hole
provided and lift the claw care stand with
the crank.
Insert the push-on wheels and turn the lock.
Place the unit with the wheels back on the ground by pushing the lifting axle towards
the unit!
Place the lifting axle on the opposite side, lift it up and drive.
-
The lifting axle develops a strong pull in the direction of the implement as soon
as the lifting axle is pressed above the centre point!
Hold the axle firmly and support yourself if necessary to avoid injuries!
-
Never place hands and feet under the chute - risk of crushing!
2.3 Transport with pallet truck
-
Serves exclusively to establish the end position of the unit before hoof care and to
load the hoof trimming chute.
-
Front and rear transport possible
-
Ensure that the forks are sufficiently long and that there is an increased risk of
tipping over the chute!
