Operating and Servicing Instructions
Page
16
of
20
5 Cleaning
NOTICE
If cleaning agents are used, follow the safety instructions in the accompanying safety
data sheet.
Dispose of cleaning water according to the national regulations.
When cleaning with high pressure cleaners, wear safety glasses.
Do not clean electrical components (switched, plugs etc.) directly with high pressure
jets.
6 Servicing / Maintenance / Repair
6.1 Safety Notices
CAUTION
Maintenance work may only be carried out by trained and qualified personnel or by
the manufacturer.
Servicing and maintenance work may only be completed if there is suitable lighting
present for the work to be carried out.
Servicing work may only be carried out if the machine is switched off.
6.2 Electrical Hazard
DANGER
Contact with Live Components.
Effects of electrical current on humans.
Compliance with legal regulations for installation, operation, maintenance and
inspection of electrical equipment.
Only allow electrical work to be carried out by electrical specialists.
Have damaged installations repaired immediately by specialist personnel.
Use of suitable plugs and connections.
Recurrent inspections.
Always switch off and protect against re-starting before opening electrical appliance
covers.
Maintenance personnel must be familiar with all technical standards and regulations.
Unexpected changes to operating conditions can lead to injury.
Check that any released bolt connections are re-tightened before starting.
