User Manual
RPC-TNC Calibration Kit
06CK001-150 and 06CK010-150
06CK001-150
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.com
Tel. : +49 8684 18-0
Email : [email protected]
Page
18 / 18
D
ie
se
s
D
ok
um
e
nt
is
t
u
rh
eb
e
rr
ec
h
tli
ch
g
es
ch
üt
zt
●
T
hi
s
d
o
cu
m
e
n
t i
s
p
ro
te
ct
ed
b
y
co
py
ri
g
ht
●
R
os
en
b
er
ge
r
H
o
ch
fr
eq
u
en
zt
ec
h
ni
k
G
m
bH
&
C
o
. K
G
How to Separate a Connection
To avoid lateral (bending) force on the connector mating plane surfaces, always support the
devices and connections.
CAUTION: Do not turn the device body. Only turn the connector nut. Damage to the centre
conductor can occur if the device body is twisted. When disconnecting a sliding load, leave the
centre conductor pullback handle in the locked position.
Use the combi-wrench to prevent the device body from turning.
Use torque wrench to loosen the connecting nut.
Complete the separation by hand, turning only the connecting nut.
Pull the connectors straight apart without twisting, rocking, or bending either of the connectors.
Draft
Date
Approved
Date
Rev.
Engineering change number
Name
Date
Herbert Babinger
24/04/12
Markus Hantschel
21/12/20
a00
20-1058
Lars Ramtke
21/12/20
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
