Operation and Maintenance Manual for Rosenberg
Compact ventilation appliance series SupraBox Comfort
Overhead devices
BA 113 BB 10/12/A/SupraBox
15
Picture: revision area
R
T
It is important to have sufficient space for
operating and maintaining the unit underneath
the suspended Suprabox. The condensate
drain connection installed by the customer
must be removed before opening the exhaust
air door. The device must be fixed at the
loops/transport loops.
The compact ventilation appliance will be completely wired for plug-in and checked by the
manufacturer. They are equipped with an integrated control system.
Only the connections for the ventilation ducts, the condensate and water must be properly installed on
site. Furthermore the electrical supply as well as external sensors or optional accessories such as
duct heaters etc. must be connected.
The remote operator control must be connected to the control system using the provided cable and
placed at the ventilation unit or nearby. The electrical connection has to be made according to the
wiring diagram, see the additional operating manual for the control system.
5.3 Connection of the ventilation ducts to the unit
The connection sleeves of the Rosenberg-SupraBox Comfort overhead versions are
provided as circular tube spigots, with T-sealing lip (1100D) or as rectangular
connection (1900D), sizes as shown in the unit drawings. The duct system must be
installed according to the valid technical standards and regulations and must support
the dead load by installations of the customer. Additional requirements concerning
Suprabox
R [mm]
T [mm]
1100 D
520
960
1900 D
520
960
