Rosen DVA-3210, Руководство пользователя

Страница: 12 / 25

12
DVA-3210
Installation and Wiring
1. Before Starting
Read these instructions and the precautions carefully.
WARNING!
Be sure to disconnect the battery (-)
terminal before starting. This is to
prevent short circuits during installation.
Precautions
•
This unit is only for cars with negative ground 12V systems.
•
Do not open the case. There are no user-serviceable parts inside.
If you drop anything into the unit during installation, consult your
dealer or an authorized Rosen service center.
•
Use a soft, dry cloth to clean the case.
2. Package Contents
•
13-Pin Data Cable
•
Installation Brackets and Assorted Hardware
•
Owner’s Manual / Installation Guide
•
Warranty Card
3. Installation Requirements
1 Use the enclosed screws for installation. Using other
screws can cause damage and void the warranty.
2 Before installation, remove the three transport screws
from the bottom of the unit! Use a Phillips screwdriver.
1.000 SCALE
Transport Screws -
REMOVE BEFORE INSTALLATION!
3 Install the unit in one of the three orientations shown.
Always adjust the springs as shown!
Note: Never install the DVA-3210 on end!