background image

 

Installation Guide Toyota Corolla

 

Rosen Entertainment Systems 

 

Copyright 2007 all rights reserved 

 Installation Guide 

 

DP-TY0824  Rev A 

 

 

Page 6 

 

10 – Pre-Delivery Test 

 

You will need to fully test the system to ensure it is working and connected to the vehicle properly. The following steps will 
guide you through this process. 

Step 1: 

Initial Test 

 

a. Reconnect the vehicle battery if needed 

 

b. Start the vehicle (ensure that it is safe to do so) 

 

c. Perform the following steps on the Multi-Media Systems to ensure proper operation: 

  Turn the unit ON  

  Select all available sources 

o

  Select the Radio and test several stations 

o

  Select the DVD and test playback of a disc  

o

  Select the iPod and test music playback 

o

  Select the XM tuner if equipped, and wait for XM Preview to start 

  Test the Steering Wheel Controls 

o

  If the vehicle is equipped, test all steering wheel controls 

  Test the Backup Sensors 

o

  If installed, test the sensors by placing a stationary object behind the vehicle (never test 

the sensors by backing the vehicle into an object) 

o

  Repeat this for each of the sensors 

  Test the Navigation 

o

  Select the Navigation and wait for the satellites to be located 

o

  Confirm the location reported is your current location  

  Eject the test disc  

  Turn the vehicle off and wait for the unit to turn off 

            d. If the system does not function properly, reset the system by pressing and holding the reset                  
 

   button located near the eject button 

 

 

 

Step 3: 

Pre-Delivery Preparation 

 

a. Start the vehicle (ensure that it is safe to do so) 

 

b. Perform the following steps 

  Calibrate the Navigation Touch Screen, if not already performed 

  Calibrate the Primary Touch Screen, if not already performed 

  Retest the Radio and general audio performance of the system 

  Remove the protective films and clean the unit as needed 

 

c. Place the Owner’s Information package in the glove compartment 

 
 

Service and Optional Parts List 

 

Part Number

   

Description

  

 

 

 

Part Number

   

Description

 

 
DP-TY0821 

 

Quick Reference Guide                      

DP-TY0822 

 

Harness, Main Interconnect               

DP-TY0824 

 

Installation Guide                            

DP-TY0823 

 

Harness, Steering Wheel Cntls 

DP-1001 

 

Manual, Owner’s       

 

 

DP-1008 

 

Harness, AUX Out 

DP-1003 

 

Manual, Navigation                      

DP-1009 

 

Harness, AUX IN 

DP-1004  Remote 

Control 

   DP-1010  Harness, 

Sensors/Camera 

DP-1023  Pin, 

Stylus 

   DP-1011  Harness, 

Dolby 

5.1/Amp 

DP-1020 

 

Card, SD without maps   

 

DP-1013 

 

Harness, iPod/Interface Box 

DP-1022  Antenna, 

GPS 

   DP-1014  Harness, 

XM 

Radio 

Interface 

DP-1025  Tuner, 

XMD1000 

Kit 

  DP-1015  Harness, 

iPod 

Replacement 

DP-1035 

 

Camera, Cylinder W/Mount 

 

DP-1007 

 

Harness, USB Adaptor  

DP-1036 

 

Camera, License Plate 

 
 

Содержание DS-TY0820









Отзывы: