Installation Guide Subaru Legacy
Rosen Entertainment Systems
Copyright 2010 All Rights Reserved
Installation Guide
DP-SB1024 Rev B
Page 7
ENABLE INSTALLER SETTINGS
You will need to select certain Installer Setting based on any Optional Equipment that you may have
installed
STEP
6
Launch the Installer Setting Screen
From any screen with the Menu Button, follow these steps
to display the Installer Setting Screen, select:
1) From any Screen, select “Menu”
2) From the Menu Screen, select “Keypad”
3) On the Keypad, Enter “7253”
Select the individual Settings as needed
for the installed components
Selectable options vary by product and installation. Select
the options as applicable for the installed optional
components.
If car is equipped with Harman/Kardon 9-Speaker
Premium audio system, “Premium” option in menu will
need to be changed to “Yes”
Perform Pre-Delivery Tests
You will need to perform several Pre-Delivery Tests to ensure customer satisfaction
STEP
7
Turn the vehicle ON and System ON
Confirm the unit starts up properly
Troubleshooting
1) Reset the System while the Vehicle is ON
2) Confirm all connectors are properly installed
3) Check the Vehicle and System Fuses
Select RADIO as the Source
Confirm that the AM and FM reception are as expected
Troubleshooting
1) Confirm Antenna is properly connected.
2) Reset the System
