manualshive.com logo in svg

Rosemount Analytical 54C, Инструкция по эксплуатации

Поделиться
Скачать
Rosemount Analytical 54C Скачать руководство пользователя страница 20

3-6

MODEL 54 C

SECTION 3.0

PROGRAMING THE  ANALYZER

This section describes the procedure for changing what is shown on the
operating display.

1.

From the program menu, move the cursor to “Configure” and press
Enter (F4). The first configuration menu is displayed. With the cur-
sor on “Display” press Enter (F4). Pressing More (F3) allows the
configuration of other display options.

2. 

Press Enter (F4) to accept the value shown in reverse video and
move the cursor to the next selection. Press More (F3) to show other
display options.

3. 

Press Enter(F4) to accept the option displayed and move the cursor
to the next option. Press More (F3) to select other menu items.

4.

This screen allows you to choose the items displayed on the third
line right and left of the operating display screen. The process tem-
perature and output 1 value are always shown on line 2 of the oper-
ating display. This screen allows you to make the following choices:
The “Display contrast” selection makes the display become lighter or

darker. 0 is the lightest display and 9 is the darkest. The display is
immediately updated. Press Exit (F1) to return to the first configura-
tion menu.

3.3 CONFIGURATION OF DISPLAY OPTIONS

Lower Left of Operating Display

• AL 1 (alarm 1 setpoint) 

• AL 3 (alarm 3 setpoint) 

• ABS (absolute conductivity)

• CF (cell factor)

• Blank (nothing displayed on lower left of

operating display)

Lower Right of Operating Display

• AL 2 (alarm 2 setpoint)

• AL 3 (alarm 3 setpoint)

• ABS (absolute conductivity)

• Slp (temperature slope)

• Out 2 (Output 2 value in mA or %)

• Blank (nothing displayed on lower right of

operating display)

Display

Outputs
Alarms

Exit

More

Enter

Sensor:

Inductive

Ref temp: 25.0°C
Temp units:

°C

Exit

More

Enter

Output 1 units:

%

Output 2 units: mA
Language: English

Exit

More

Enter

Display left:

AL1

Display right:

AL2

Display contrast: 4

Exit

More

Enter

Menu Item

Options

Sensor type

Inductive/Contacting

Reference temperature

0-200°C

Temperature units

°C/°F

Menu Item

Options

Output 1 units

mA/percent

Output 2 units

mA/percent

Language

English/Français/Español/Deutsch/Italiano

Содержание 54C






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды