ENGINEERING STANDARDS
Rosedale Products, Inc.
IOM
Issue Date: 29MAY96
3730 West Liberty Road
D6150STD.WP6
Revision:
Ann Arbor, MI 48103
n:\iom\
Revision Date:
Specification No.
7.3.4
PAGE: 4 of 6
INSTALLATION, OPERATION, & MAINTENANCE MANUAL
Rosedale Engineering Standards are the property of Rosedale Products, Inc. A Rosedale standard or copy thereof shall not be distributed (except with express approval of Rosedale
Products, Inc.) to any individual or firm beyond the intended recipient firm or individual. Firms of individuals acting contrary to the above may be subject to suit, ineligibility for continued or
future employment, or removal from Rosedale's "Approved Manufacturers and Specialty Contractors List".
10.
Remove debris and sludge from inside the inlet portion of housing to avoid interference with
cover seal or flow of fluid being filtered.
11.
Remove basket seal (if applicable) and inspect, replace if necessary.
12.
Install clean filter basket and filter bag (if applicable). P lace the basket into the filter housing,
make sure the basket flange is firmly seated on the basket collar. If applicable, insert bag on top
of the bag basket flange making sure filter bag ring is firmly seated inside the basket flange. For
best results, be sure filter bag is installed fully extended to the bottom of the basket.
13.
Inspect cover gasket for cuts or other signs of failure and make sure it is properly seated.
14.
Move cover back into position, and alternately tighten the three clamp assemblies evenly to
ensure a leak proof seal between cover and housing body. The recommended torque value for
5/8"-11 closure assemblies is 150
ft-lb s.
Your Rosedale Model 6 Duplex Filter unit is now ready for continuous operation during the next filter media
cleaning/replacement maintenance cycle.
III.
Spare P arts List
Your Rosedale Model 6 Duplex Filter unit will give you many years of reliable service provided periodic inspections
are made of various components and replacement of worn parts are made promptly. The following is meant to be a
recommended spare parts list, these parts are illustrated on the following page.
SPARE PARTS LIST
Balloon
Description
Part Number
Time-Frame
1
Cover Seal
6150CG-*
as needed
2
Basket Seal
6BG-*
as needed
3
Cover
6*150
as needed
4
Eye Nut
8ENNI
as needed
5
Rod End
8RENI
as needed
6
Clevis Pin Assembly
8CPNI
as needed
7
Filter Bag
(See Order)
as needed
8
Filter Basket
(See Order)
as needed
9
Tripod Legs
6T18*S
as needed
10
Duplex Valve Package
D#**
as needed
* Select Material Designation:
C=Carbon Steel
B=Buna N
S=304 Stainless Steel
E=Ethylene Propylene
S316=316 Stainless Steel
V=Viton
TEV=Teflon Encapsulated Viton
# Select Valve Size:
2-3-4-6-8-...-14
TSW=Teflon Solid White
