Rose electronics VSP-1X16V, Инструкция по установке и эксплуатации

Страница: 11 / 18

VIDEO SPLITTER MANUAL
7
Removing the switch cover you can see the 3 banks of DIP switches. The
default setting is off (all switches down). The settings are adjusted per port
sequentially 1 - 4. Each bank adjusts a different color. SW4 = Red; SW5
= Green; SW6 = Blue;
DIP SWITCH SETTINGS: SW4 = R SW5 = G SW6 = B
These switches are used to adjust the RGB signal clarity (gain) when using
higher resolutions or running extended distances. You may experiment by
using these switches if your video quality is not as clear as desired.
The VSP-2X8V has two layers of circuit boards. Use a plastic object to
switch the DIP switches.