Rose electronics VSP-1X16V, Инструкция по установке и эксплуатации

Страница: 10 / 18

6
VIDEO SPLITTER MANUAL
User operating instructions
The following instructions apply to all Video Splitter models
Power VGA VGA VGA VGA VGA
INPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
Power switch OUTPUT SIGNAL I NPUT SELECT
ON/OFF A / B
Figure 4. Video gain switches
SWITCHES:
INPUT SELECT A / B
This switch is used to select between the “A” or “B” VGA signal sources.
OUTPUT SIGNAL ON / OFF
This switch is used to blank the output signals on all VGA output ports
except port 1
CONNECTORS:
VGA INPUT A / B HD15 Male Connector
Plug the cable from the VGA connector on your CPU into the port connector
“A”. A second VGA source connects to port “B”.
VGA OUTPUT HD15 Female Connector
Plug the monitors into these ports (2, 4, or 8)
POWER INPUT
Plug in the provided power adapter into this connector.