Rose electronics Vista L SERIES, Инструкция по установке и эксплуатации

Страница: 34 / 36

28
Vista KVM-Series Installation and Operations Manual
Appendix F. Typematic rate
Typematic Command
Press the left <Ctrl> key, type “A”, enter the typematic value (1-3 digit)
followed by <Enter>.
The typematic value is determined from the following tables using the
equation: Typematic Value = Rate value + Delay Value. Pick the desired
rate in keys/sec. and the delay in milliseconds from tables below. Add the
Rate Value and the Delay Value. The sum of these values is the typematic
value to enter.
For example to use a Rate of 16.0 keys/sec. and a 500 millisecond delay,
the Rate value = 7 and the Delay value = 32. Add 7 + 32 = 39. To set a
typematic value of 16, press the left <Ctrl> key, type “A”, enter 39, and
then press Enter.
Typematic Rate
Rate
Keys/sec Rate
Value Rate
keys/sec Rate
Value Rate
Keys/sec Rate
Value Rate
Keys/sec Rate
Value
30.0 0 15.0 8 7.5 16 3.7 24
26.7 1 13.3 9 6.7 17 3.3 25
24.0 2 12.0 10 6.0 18 3.0 26
21.8 3 10.9 11 5.5 19 2.7 27
20.0 4 10.0 12 5.0 20 2.5 29
18.5 5 9.2 13 4.6 21 2.3 28
17.1 6 8.6 14 4.3 22 2.1 30
16.0 7 8.0 15 4.0 23 2.0 31
Typematic Delay
Delay* Delay
Value Delay* Delay
Value Delay* Delay
Value Delay* Delay
Value
250 0 500 32 750 64 1000 96
* Delay in milliseconds