UltraVista Pro Manual
7
1. Begin by clicking the
Communication Setting
option in the
Software Operation
tab. This will display the
Communication Setting
window.
Figure 14. Communication Setting Window
2. If an Ethernet connection is to be used, the default IP address and port number of the unit are
192.168.1.65
and
1024
. The IP address of the controlling PC must be changed the first time to
192.168.1.x
(where
x
is a number from
0
to
255
). This will put in the same network space as the unit,
and allow them to talk to each other. Once this communication has been established, the IP address of
the unit can be changed to one more suitable to the network it is in, and the IP address of the
controlling PC reset to its previous setting.
3. Alternately, to establish a serial connection, select the appropriate computer COM port, and ensure that
the baud rate is set to 9600.
4. Click the
OK
button to save the settings.
5. Finally, click the
Connect
button in the
Software Operation
tab to connect to the unit.
