background image

LIMITED WARRANTY 

 

 

 

 
 
Rose Electronics warrants the UltraVista LC II to be in good working order for one year from the date 
of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good 
working order at any time during this one-year warranty period, Rose Electronics will, at its option, 
repair or replace the Unit as set forth below. Repair parts and replacement units will be either 
reconditioned or new. All replaced parts become the property of Rose Electronics. This limited 
warranty does not include service to repair damage to the Unit resulting from accident, disaster, 
abuse, or unauthorized modification of the Unit, including static discharge and power surges. 
 
Limited Warranty service may be obtained by delivering this unit during the one-year warranty period 
to Rose Electronics or an authorized repair center providing a proof of purchase date. If this Unit is 
delivered by mail, you agree to insure the Unit or assume the risk of loss or damage in transit, to 
prepay shipping charges to the warranty service location, and to use the original shipping container or 
its equivalent. You must call for a return authorization number first. Under no circumstances will a unit 
be accepted without a return authorization number. Contact an authorized repair center or Rose 
Electronics for further information.  
 
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE 
LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO 
WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME 
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO 
THE ABOVE LIMITATION MAY NOT APPLY TO YOU.  
 
IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR SOLE 
REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL 
ROSE ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST 
PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING 
OUT OF THE USE OF OR THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE 
ELECTRONICS OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.  
 
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY 
TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE 
OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. 
 
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the interference at his own expense. 
 
IBM, AT, and PS/2 are trademarks of International Business Machines Corp. Microsoft and Microsoft 
Windows are registered trademarks of Microsoft Corp.  Any other trademarks mentioned in this 
manual are acknowledged to be the property of the trademark owner. 

 

Содержание UltraVista LC II VWL-B122FD









































Отзывы: