3- Operating Instructions (Single and Dual access models)
With all cabling in place, the default IP address changed to be compatible with your network,
and power applied to the connected computer, access to the connected computer can now
be made. Connecting to the computer can be made from any computer with access to the
network UltraLink 2 is connected to.
From a network workstation, start internet explorer or other web browser. Type in the
assigned IP address given to UltraLink 2 in the URL field. The below browser screen will
display. Click on “Connect using built-in Java VNC Viewer”. This will install a small java
applet on the connecting computer and then display the remote computers video.
The connected computers video will display in the web browser’s VNC viewer window.
When the connected computer’s video displays, you will have full control, provided your
security settings permit it, of the connected computer. In the upper right corner is a tab
labeled “Configure”. Clicking on this tab displays the configuration menu shown below.
4-Configure Menu
The configuration menu allows you to set-up user accounts, configure the unit, set the time
and date used to time stamp the log file, configure the network, and view the logging and
status.
