RackView Sideways (21" and 24") Manual
2
Package Contents
The RackView package contents consist of the following:
1 x RackView Sideways sliding KVM drawer
1 x Mounting bracket (sliding rails) set
1 x Set of screws/washers for assembly
1 x Combo interface cable (depending on the model selected)
1 x Power supply unit
1 x Power cable
1 x Manual
The above package content is only for the single console model. The contents can vary with options such as a
KVM switch, HDMI and 3G/SDI video and DC power.
Additional cables are usually ordered separately. If the package contents are not correct, contact Rose
Electronics or your reseller so the problem can be quickly resolved.
RackView Options
Integrated KVM switch, DVI USB Audio (12 port) or VGA USB (8 or 16 port)
HDMI (replaces the DVI interface)
3G/HD/SD-SDI video
PIP and PBP display options on the 24" ultra-high resolution model only
Front USB 2.0 port for device access, available with the KVM-Hub switch option only
Trackball mouse
DC power, 12, 24, 48, 125, 250V
Before Installation
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
Make sure the mounting location has good ventilation, is out of direct sunlight, and away from sources of
excessive dust, dirt, heat, water, moisture, and vibration.
