Rose electronics Orion XTender OR2-SRDFSUD1D, Инструкция по установке и эксплуатации

Страница: 42 / 79

Orion Extender Installation and Operation Manual 39
Setup of Upgrade Modules
The modules can be hot plugged.
Upgrade Module Analog Audio / Serial:
1. Connect the audio source to the Transmitter unit (e.g. CPU audio output with Transmitter audio input, CPU
audio input with Transmitter audio output).
2. Connect the audio output at the Receiver unit with headphones or suitable speakers.
3. Connect the audio input at the Receiver unit with a suitable microphone.
Upgrade Module Serial RS422:
1. Connect the CPU to the Transmitter unit using the serial cable.
2. Connect the Receiver unit to the input device serial connector.
Upgrade Module Digital Audio:
1. Connect the digital audio source to the Transmitter unit using the appropriate audio cable.
2. Connect the audio output of the Receiver unit with digital speakers or audio amplifiers with digital input.
If several active sources are connected, Mini-XLR input takes priority. The audio signal is available at all
outputs.
Upgrade Module USB-HID:
1. Connect the CPU to the Transmitter unit (USB-HID 2).
2. Connect the USB-HID devices to the Receiver unit (Connect to USB-HID devices 2).
Upgrade Module PS/2:
1. Connect the CPU to a Transmitter unit using proven PS/2 cables.
2. Connect the PS/2 devices to the Receiver unit.
Upgrade Module USB 2.0 Embedded:
1. Connect a CPU’s USB 2.0 port to the Transmitter unit (USB 2.0).
2. Connect the USB 2.0 devices to the Receiver unit.
Upgrade Module USB 2.0:
1. Connect a CPU’s USB 2.0 port to the Transmitter (USB 2.0).
2. Connect the USB 2.0 devices to the Receiver unit.