![Rose electronics MultiVideo DP MDM-4T2DP-A1 Скачать руководство пользователя страница 10](http://html.mh-extra.com/html/rose-electronics/multivideo-dp-mdm-4t2dp-a1/multivideo-dp-mdm-4t2dp-a1_installation-and-operation-manual_1487244010.webp)
MultiVideo DP KVM Switch Manual
7
Control using the RS
-
232 port
Controlling the Multivideo DP via RS-232 requires an RS-232 card installed on your computer or a USB to RS-
232 adapter. Below are instructions on how to create an RS-232 connection between a PC and the Multivideo
DP switch
Use a terminal client software to connect the host PC or notebook to the switch. Make sure to use
communication settings 9600 bps, N, 8, 1 No flow control.
Check the device and your PC to determine if you need a male to male or a male to female cable and how long
it needs to be. The Multivideo DP requires a straight through cable. You can use a Null Modem Adapter to
convert a crossed cable to a straight through cable. Examples of crossed and straight thorough cable pin-outs
are shown below. The standard maximum length for an RS-232 cable is 50 feet (15 meters).
Figure 9. Examples of 9 pin RS-232 Straight Through and Crossed Cables
Establish a connection to the Multivideo DP switch
1. Connect an RS-232 cable to the RS-232 connector on the PC.
2. Connect the other end of the cable to the RS-232 port of the Multivideo DP.
3. On Windows, use the Windows Control Panel / Device Manager to identify the COM port number. See
instructions and Figure 10. below.
4. Power on the device.
Figure 10. Identifying Serial Ports on Window Device Manager