CrystalLink USB3.1 Extender Manual
4
Receiver Unit
The receiver unit has two USB3.1 Type-A ports for connecting up to two USB3.1 devices. The receiver is
powered directly by the included 24VDC power supply, delivering 900mA of current per USB port.
Receiver unit – front panel view
Receiver unit – rear panel view
Item Type
Description
1
USB3.1 Type A Ports
Used to connect USB 3.1 device(s) to the receiver unit.
Ports accept locking or non-locking USB 3.1 Type A connectors.
2
Power ON
Unit is powered correctly
Power OFF
Unit is not powered, or not powered correctly
3
Status Blinking
Waiting for connection to transmitter
Status ON
Transmitter and receiver are linked, and operating normally
Status OFF
Fault detected, power cycle required
4
Host ON
SuperSpeed host detected on upstream facing port
Host OFF
SuperSpeed host not detected
Host Blinking
SuperSpeed host is suspended
5
Power Port
Connects to the locking AC power supply. Required on the receiver unit for
correct operation.
6
Link Port
Extension link duplex transmitter LC fiber optic transceiver port.
Figure 2. receiver unit – LED’s and connectors
5
4
3
2
1
6
1
