Parts
Instructions for Hanging
Instruction Sheet
Step 1
Install wall mounting hangers
between frame rail and backer board (at
top and bottom sides of the frame only).
Line up holes. Fig. 1
Step 2
Place frame in desired position on wall
and locate placement for molly anchors
or wood screws at top and bottom of
frame only. Fig 2
Step 3
Drill holes to accommodate anchors
for drywall or screws for wood. Fig 3
Step 4
Replace frame and screw into wall. Fig 4
Step 5
Open rails, put in poster and
close rails. Fig 5
UltraFrame™
Instructions for Hanging
Incept-4.23.01
UltraFrame™ is a trademark of Rose Displays, Ltd. Neither the manufacturer
nor any sales agent may be held liable for injury, loss or damage resulting from
the use of these products. Part #01INSUltraFrame
Wall Mounting
Hangers
06-6067
UltraFrame
Wood Screws or
Molly Anchors
2010SC
16-0016
Figure 5
Figure 1
Figure 2
Figure 3
Figure 4
