Parts
Instruction Sheet
AnoGotcha™
Step 1
Insert T-Top Gotcha Holder into AnoGotcha
Shell.
Fig. 1
Step 2
Snap the AnoGotcha Holder completely open
so the hinge is turned up as far as possible.
Insert poster into holder until top of poster
meets top of holder. To close snap the
AnoGotcha Holder shut.
Fig. 2
With large or curling graphics, it may be easier
to insert graphic at one end and slide into
holder from one end to another.
Step 3
Slide Wally Window Mount into top rail of the
Improved AnoGotcha holder.
Fig. 3
Step 4
Push end caps into place.
Fig. 4
Step 5
Suspend poster. Make sure glass and suction
cups are clean and free of dust and dirt.
Fig. 5
Important note:
For best performance when first applied and
occasionally thereafter, press the middle of the
cup to “burp” extra air out.
Instructions for Hanging
Incept-9.10.02
Figure 1
Figure 3
Figure 4
End Caps
06-5525
T-Top Gotcha
12GT100
AnoGotcha Shell
12AT300
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
Window Mounts
20-0038
Figure 2
Figure 5
The AnoGotcha
®
is a registered trademark of Rose Displays, Ltd. Neither
the manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSAnoGotchaWindowMounts
