Rosco X-Effects 297000055001 Скачать руководство пользователя страница 5

Страница: 5 / 28

PREVENTING ELECTRIC SHOCK

• This machine uses mains electrical power at 100-240VAC. When directly contacted, such voltages are

hazardous to human life. Follow all local electrical codes and take precautions when using this product.

• This product is designed to operate from three-wire power systems, where one of the wires is a safety

ground. DO NOT disconnect the safety ground, or use extension cords or adapter plugs to connect this

machine to a two-wire system. Operation without a safety ground may result in hazardous electrical shock.

• Use only extension cords that are of appropriate length and are rated for X-Effects LED’s specified voltage

and current. If an extension cord shows signs of wear or gets warm to the touch, discontinue its use and

obtain a cord with a higher current rating. Improper extension cords are hazardous and may result in poor

performance due to excessive voltage drop.

• Disconnect unit from power source before servicing and when not in use.

Содержание X-Effects 297000055001





























Результаты поиска

Содержание X-Effects 297000055001

Отзывы:

Похожие инструкции для X-Effects 297000055001

Бренды по названию

Популярные бренды

Rosco X-Effects 297000055001, Руководство пользователя

Результаты поиска

Содержание X-Effects 297000055001

Отзывы:

Похожие инструкции для X-Effects 297000055001

Бренды по названию

Популярные бренды