background image

- 16 -

1 YEAR LIMITED WARRANTY

Rosco Laboratories warrants to the first retail purchaser that this Product will be free from defects in 
workmanship and material for a period of twelve (12) months from the date of original purchase.   For 
warranty service you must be able to provide proof of purchase. 

Should this Product prove defective during the warranty period, please contact your local Rosco office 
for return authorization.  No warranty service will be performed without Return Authorization.  At Ros-
co’s sole discretion, covered Products will be repaired or replaced with new or refurbished equipment 
or a model of like kind and quality.  Exchanged or replaced parts and Products assume the remaining 
warranty period of the original Product covered by this limited warranty.

You are responsible for securely packaging the defective Product and returning it to Rosco as per the 
instructions on the Return Authorization.  Within North America, Rosco will ship the repaired or replaced 
Product to you freight prepaid. Shipments to other locations will be made freight collect.  Do not return 
fog machines with fog fluid. 

This warranty is not transferable and does not extend beyond the first retail purchase of the Product. 
This warranty does not cover damage to the Rosco product caused by parts not manufactured, distrib-
uted or certified by Rosco.  Rosco is not obligated to provide warranty service should the product fail 
to be properly maintained or fail to function properly as a result of misuse, abuse, improper installation, 
neglect, improper shipping, damage caused by disasters such as flood, fire and lightning, improper elec-
trical current or connection or service other than by a Rosco Authorized Servicer.  If a claimed defect 
cannot be identified or reproduced, you will be held responsible for the costs incurred.

Unless otherwise stipulated by state law, all warranties expressed or implied are limited to the twelve 
(12) month period of this warranty.

THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS 
OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANT-
ABILITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE.  EXCEPT AS PROVIDED IN THIS 
WRITTEN WARRANTY AND UNLESS EXCLUSIONS ARE SPECIFICALLY FORBIDDEN BY STATE LAW, NEITHER 
ROSCO NOR ITS AFFILIATES WILL BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR DAMAGE, INCLUDING 
DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING INJURY TO PERSONS OR 
PROPERTY, RESULTING FROM THE USE OR INABILITY TO USE THE ROSCO PRODUCT, WHETHER RESULT-
ING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY.

•NOTE: USE OF ANY FLUID OTHER THAN A ROSCO BRAND FLUID WILL VOID THE WARRANTY.

Содержание Vapour Plus



















Отзывы: