5
PICTURE SETUP
DIMMER DAY
CONTRAST 50
BRIGHTNESS 50
COLOR 50
TINT 50
LANGUAGE ENGLISH
VIDEO SYSTEM NTSC
RESET >
PICTURE SETUP
DIMMER DAY
CONTRAST 50
BRIGHTNESS 50
COLOR 50
TINT 50
LANGUAGE ENGLISH
VIDEO SYSTEM NTSC
RESET >
PICTURE SETUP
DIMMER DAY
CONTRAST 50
BRIGHTNESS 50
COLOR 50
TINT 50
LANGUAGE ENGLISH
VIDEO SYSTEM NTSC
RESET >
PICTURE SETUP
DIMMER DAY
CONTRAST 50
BRIGHTNESS 50
COLOR 50
TINT 50
LANGUAGE ENGLISH
VIDEO SYSTEM NTSC
RESET >
PICTURE SETUP
DIMMER DAY
CONTRAST 50
BRIGHTNESS 50
COLOR 50
TINT 50
LANGUAGE ENGLISH
VIDEO SYSTEM NTSC
RESET >
16
17
1) Press [ ] button until OSD menu [PICTURE
SETUP] appears.
2) Press [ ] button to move a place where
want to change and choice proper value by
pressing [ ] button.
Video standard system, / PAL conversion
1
If use PAL system on NTSC system using country, it may cause a malfunction. This
products can convert NTSC / PAL system manually but it is not automatic. Before use,
Please check and set the system.
7” WATERPROOF MONITOR
SETTING
Dimmer sensor setting
2
* Dimmer is set AUTO from the factory.
NTSC system country : USA, CANADA, JAPAN, KOREA, TAIWAN, MEXICO, etc.
PAL system country : AUSTRALIA, GERMANY, U.K, NETHERLANDS, ITALY, etc.
NOTICE
1) Press [ ] button until OSD menu [PICTURE
SETUP] appears.
2) Press [ ] button to move a place where
want to change and choice proper value,
DAY(brighter) / NIGHT(Darker) / AUTO(Sensor)
by pressing [ ] button.
Press [ ] button to switch DAY -» NIGHT -» AUTO -» DAY.
Picture setup
3
* Each setting value is set 50 from the factory.
Language display selection
4
1) Press [ ] button until OSD menu [PICTURE
SETUP] appears.
2) Press [ ] button to move a place where
want to change from CONTRAST to TINT
and choice proper value by pressing [ ]
button.
1) Press [ ] button until OSD menu [PICTURE
SETUP] appears.
2) Press [ ] button to move a place where
want to change and choice proper value by
pressing [ ] button.
Reset
5
* All settings are initialized at the factory mode except for the video input.
(NTSC / PAL)
1) Press [ ] button until OSD menu [PICTURE
SETUP] appears.
2) Press [ ] button to move to RESET and
then press [ ] button.
* language selection : ENGLISH - FRENCH - GERMAN - ITALIAN - SPANISH
