FUNCTIONS AND OPERATION
•
POWER
When the ignition is switched on, the monitor will be in standby mode (a steady red light will
indicate that the monitor is energized, no image will appear on the screen until triggered or
manually turned on. The trigger wire is energized by 12VDC power from a backup light or circuit.
A steady green light will appear on your monitor. The image captured by the selected camera
will appear on the monitor.
• Pressing the power switch will change the monitor status from standby to steady-on.
Steady-on mode status will show camera view depending on user selection
•
/-
Adjust Speaker Volume
These buttons are also used to adjust the values within selected setting of menu option
•
'MENU' BUTTON
(See p. 9)
Press the MENU bottom to open on screen options.
Press Menu to cycle through choices and +/- to change your settings
•
C1/C2 (NOT APPLICABLE FOR STSK7465)
Switched from Camera 1 to Camera 2 and vice-versa
MONITOR
Safe-T-Scope
®
Backup Camera System
STSK7465
8 5
