SETTINGS
_________________________________________________________
FACTORY SETTINGS
5. Reset
Press the “MODE“ button until OSD menu “PICTURE SETUP“ appears.
Press button to select “RESET“ and use to enter selection.
* All settings are initialized at the factory mode except for the video input. (NTSC/PAL)
INSTALLATION OF U-BRACKET
_______________________________
- 18 -
Double side
adhesive tape
Screw hole
Double side adhesive tape
Ceiling Installation
Standard Installation
1. Ensure that the monitor is installed with enough room for heat emission. Install the
monitor stand with enclosed screws and double side adhesive tape as shown in the
above image.
2. Fix the monitor to the monitor stand firmly.
3. Sun Visor should be installed with 4 screws.
PICTURE SETUP
DIMMER
DAY
CONTRAST 5
0
BRIGHTNESS 5
0
COLOR
50
0
5
T
N
I
T
LANGUAGE E
NGLISH
VIDEO SYSTEM NTSC
>
T
E
S
E
R
