FUNCTIONS AND OPERATION - CONTINUED
7. When there is input signal more than 2 triggers, the monitor display fully connected
screen (Trigger input screen) as the priority order. And the screen goes former one
when the signal is disappears, the rest will be display as the priority order.
* If the screen turns by trigger signal, the POWER, MENU & MODE buttons
are disabled.
* In the standby position if the trigger wire is activated the monitor will turn on.
The screen will turn off once the power is de-activated to the trigger wire.
The screen will then turn off when the trigger signal has gone off.
SETTINGS
_________________________________________________________
VIDEO SYSTEM
1. NTSC/ PAL conversion
Press the “MODE“ button until OSD menu “PICTURE SETUP“ appears.
Press button to select “VIDEO SYSTEM“ and use to enter selection.
If using PAL system on NTSC system using county, it may cause a malfunction. The product
can convert NTSC / PAL system manually but it is not automatic. Before use, Please check
and set the system.
CAM3
CAM1
CAM4
CAM1
TRIGGER PRIORITY ORDER
TRG1(Rear light) > TRG2+3(Emergency light) > TRG2(Left side
light)
> TRG3(Right side light) > TRG4
NTSC system country: USA, CANADA, JAPAN, KOREA, TAIWAN, MEXICO, etc.
PAL system country : AUSTRALIA, GERMANY, U.K., NETHERLANDS, ITALY, etc.
- 16 -
