Safe-T-Scope
®
7" MIRROR MONITOR KIT
STSK4730
CAMERA INSTALLATION
EXAMPLE CAMERA INSTALLATION
1. Select a high and centered location at
the rear of the vehicle to mount the camera.
IMPORTANT:
When selecting this location
it is highly recommended that the image
transmitted by the camera show the rear
bumper and area behind the vehicle.
2. It is not recommended mounting the
camera near the lower area of the vehicle
(ex. bumper). This reduces the view of the
camera and increases the chance of physi-
cal damage to the camera.
3. Once the location for the camera is cho-
sen, drill the mounting hole to the inside of
the vehicle using a 5/16 drill bit. Clear any
obstacles before drilling the hole.
4. Attach the provided 3M double-sided
tape to the back of the camera.
5. Insert camera wire through the newly
drilled hole. Mount the camera securely in
place.
6. To finalize the camera installation, hand-
tighten the provided 5/16 nut to the back of
the camera on the inside of the vehicle.
6 7
Fig. C
Obstructions behind truck
Camera location
Camera location
Mount the camera high and centered
on the rear of the vehicle.
Typical view of a properly
installed camera.
Vehicle bumper
