FUNCTIONS AND OPERATION
•
POWER
When the ignition is switched on, the monitor will be in standby mode (a steady red light will
indicate that the monitor is energized, no image will appear on the screen until triggered or
manually turned on. The trigger wire is energized by 12VDC power from a backup light or circuit.
A steady green light will appear on your monitor. The image captured by the selected camera
will appear on the monitor.
• Pressing the power switch will change the monitor status from standby to steady-on.
Steady-on mode status will show camera view depending on user selection
•
/-
Adjust Speaker Volume
These buttons are also used to adjust the values within selected setting of menu option
•
'MENU' BUTTON
(See p. 9)
Press the MENU bottom to open on screen options.
Press Menu to cycle through choices and +/- to change your settings
•
C1/C2 (NOT APPLICABLE FOR STSK7465)
Switched from Camera 1 to Camera 2 and vice-versa
MONITOR
Safe-T-Scope
®
Backup Camera System
STSK7965
8 9
Image device: Sony ¼" CCD
Pixels:
270,000
TV lines: 420
InfraRed LED's: 18 High-Output
Minimum illumination: 0 Lux (infrared LED's on)
Night vision range: 30 feet
Video Output: 1.0 Vp-p, 75 Ohm
Shock rating: 100G
Vibration rating: 15G
Field of view: 120°
Operating temperature °F (°C): -4° to +140° (-20° to + 60°)
Storage temperature °F (°C): -40° to +176° (-40° to + 80°)
Weight: .6 lb.
Dimensions W x H x D: 3" x 2" x 2"
• Please read this manual carefully before using the product.
• This system is intended as an aid to safe reverse operation.
• Drivers must always use extreme caution when operating a vehicle.
• Specifications subject to change without prior notice.
• Keep all cables AWAY from rotating and electrically noisy components.
• Make sure all cables are fastened properly so that you can prevent wire chafing, kinks, cuts, etc...
• Always consult your dealer when fitting any electrical or electronic equipment to a vehicle fitted
with a CAN-bus or multiple system.
WIRING NOTES
SYSTEM TECHNICAL SPECIFICATIONS:
STSM251: (Includes STSK5465/PHAR, BAS4515, STSDF1000)
STSC141: ( Includes Sunshade and Mounting Hardware)
• To prevent electrical shock, DO NOT
OPEN MONITOR CASE.
• Avoid exposing monitor to water, rain,
moisture etc.
• Do not disassemble the camera.
This voids the warranty.
• Disassembling the camera will
compromise the waterproof seal.
WARNING
65’ Heavy Duty w/ Twist - Lock Connectors
STSH341: (Included in Kit)
Screen size (diagonal): 7"
Maximum No. of cameras: 2 Inputs/Channels
Screen ratio: 16:9
Contrast ratio: 500:1
Video system: NTSC
Voltage input: 12 ~32 Vdc
Operating temperature °F (C°): 5° to 149° (-15° to +65°)
Storage temperature: -4° to +158° (-20° to + 70°)
Shock rating: 100g
Vibration Rating: 6g
Speaker Impedance: 8 Ohms
Weight: 0.9 Lb.
Dimensions W x H x D: 5.7" x 4.9" x 1"
