RevoPRO Operations Manual
p. 13
Mode 2 Channel assignments
CH
Level
DMX
Function / Result
1
0
0
Gobo A - Stop
2
0
0
Gobo B - Stop
1
1-49
1-127
Gobo A - CW (fast to slow)
1
50
128
Gobo A - Stop
1
51-99
129-254 Gobo A - CCW (slow to fast)
1
FL
255
Gobo A - Stop
2
1-49
1-127
Gobo B - CW (Fast to slow)
2
50
128
Gobo B - Stop
2
51-99
129-254 Gobo B - CCW (slow to fast)
2
FL
255
Gobo B - Stop
MODE THREE: 4 CH Indexing – 8 bit resolution - Forward Control
Indexing is a feature where the designer can specifically stop the rotation at a
certain location. This is useful for some effects like Clock or See-Saw move-
ments, but it is also useful with an I-Cue Mirror when you need to keep the
orientation of a gobo very specific, as with a logo. Mode Three allows for sim-
ple, low resolution indexing using only 2 channels per gobo. As in Mode One,
speed and direction for Gobo A is controlled by Channel 1, speed and direc-
tion for Gobo B controlled by Channel 2. Channel 3 is used to set the position
of between 1-degree and 370-degrees of Gobo A. Channel 4 is used to set the
position of Gobo B between 1-degree and 370-degrees. For precise program-
ming, program the index using DMX values, not channel percentages.
Example: To set Gobo A rotating at full speed, set CH1 = 99% and set CH3 = 0.
To now stop Gobo A at a precise orientation, set CH 3 = DMX 127 (or any other
value > 0). Rotation will continue until the exact orientation is acheived and
then stop. To continue rotating, set CH3 = 0.
Mode 3 Channel assignments
CH
Level
DMX
Function / Result
1
0
0
Gobo A - Stop
2
0
0
Gobo B - Stop
1
1-49
1-127
Gobo A - CW (slow to fast)
1
50
128
Gobo A - Stop
1
51-99
129-254 Gobo A - CCW (slow to fast)
1
FL
255
Gobo A - Stop
