Rosco Miro Cube 4CA, Руководство пользователя

Страница: 15 / 36

DMX Mode
15
The fixture can run in either 8 bit or 16 bit DMX mode. In 8 bit mode,
The Braq Cube accepts one DMX channel for each color. In 16 bit
mode, two channels are required for each color. To change from 8 bit
to 16 bit mode or from 16 bit to 8 bit press
MENU
until
“SET TO 16BIT
DMX?” or “SET TO 8BIT DMX?” appears on the LCD, then press OK .
Filament Fade:
An incandescent lamp has a slight delay, or lag with changing
intensities wheras an LED responds instantly. The difference is most
noticeable during a theatrical black out. The Braq Cube can emulate
an incandescent lamp by selecting one of the Tungsten Fade settings.
To change the Tungsten Fade setting, press
MENU
until
“CHANGE
FILAMNT FADE?”
appears on the screen, and press
OK
. Select from
“OFF”, “1 (MIN)”, “2 (MID)” or ”3 (MAX)” using the or
keys, and press OK . A setting of “3 (MAX)” provides the greatest
delay. A setting of
“0”
will turn the Filament Fade off, and allow the
LEDs to respond instantly to changing DMX input.
8 bit or 16 bit DMX: