Rosco LitePad Vector, Руководство пользователя

Страница: 8 / 12

8
LITEPAD VECTOR USER’S GUIDE
DMX Operation
LitePad Vector can be operated via DMX512 protocol using the RJ45 DMX In and DMX Out
connectors on the Rear Control Panel.
DMX Control uses two channels:
•
DMX Channel 1 = Output (Dimming) Intensity
(DMX value 0-255 = level 0-100%)
•
DMX Channel 2 = CCT Color Temperature
(DMX value 0 = 3000K, 255 = 6000K)
1. When a valid DMX signal is detected, “DMX On” will appear in the upper right portion of
the LED display.
2. Press the left-hand and right-hand knobs simultaneously for 2 seconds until the word
“Adr” flashes in the upper left corner of the display.
a) Rotate the right-hand knob to the desired DMX address (001 to 511). The current DMX
address is shown in the upper left portion of the LED display.
b) Press both knobs simultaneously for 1 second to confirm DMX address setting. “Adr”
will stop flashing once this action has been completed.
NOTE: LitePad Vector will maintain its current Color Temperature and Output/Dimming
settings in the event of an interruption to the DMX signal.
LitePad Vector RJ45 Pinout Chart
PIN# COLOR FUNCTION
1 White/Orange DMX Data Signal Plus (+)
2 Orange DMX Data Signal Minus (-)
3 White/Green N/A
4 Green N/A
5 White/Blue N/A
6 Blue N/A
7 White/Brown N/A
8 Brown N/A