Rosco Image Spot Mini Series, Руководство пользователя

Страница: 12 / 22

12
DIMMING CONTROL
The Rosco Image Spot Mini projector offers two modes of control:
Manual dimming operation or user-supplied 0-10V, Triac or DMX512
data input.
In Manual mode the Image Spot Mini’s beam intensity can be adjusted
via the dimming knob on the rear panel. Turn the knob clockwise for
brighter output and counter-clockwise for dimmer output.
When using 0-10V, Triac or DMX dimming controls, ensure that the
proper Image Spot Mini driver has been ordered and that the proper
lead wire connections have been made (see diagrams on page 9).
DMX control requires that a DMX address be established for each projector. A single channel is required for
output intensity control via DMX. RDM protocol can be used to change the DMX address from the factory
default 001. The controller supports DMX512 bi-directional communication.
FOCUSING
The focus can be adjusted by rotating the lens tube clockwise or counter-clockwise.
Due to the ultra-clear optics of the Image Spot Mini projector, it is advised to keep the optic path clean of
dust and debris. Use a non-abrasive micro-fiber cloth with Rosco Lens Cleaner to clean the Image Spot Mini
lenses and any glass gobos or Permacolor dichroic glass filters you may have installed.
Dimming Knob