Rosch Computer ROSCH-Q67FVISA, Руководство пользователя

Страница: 22 / 31

2-12
Hardware Setup
▍
Fan Power Connector: CPUFAN1 / SYSFAN1
The fan power connectors support system cooling fan with +12V. When
connecting the wire to the connectors, always note that the red wire is the
positive and should be connected to the +12V; the black wire is Ground
and should be connected to GND. If the mainboard has a System Hard-
ware Monitor chipset on-board, you must use a specially designed fan
with speed sensor to take advantage of the CPU fan control.
1.Gro
und
2.+1
2V
3.Se
nsor
4.Co
ntrol
1.Gro
und
2.+1
2V
3.Se
nsor
Important
Please refer to the recommended CPU fans at processor’s official
website or consult the vendors for proper CPU cooling fan.
Fan cooler set with 3- or 4-pin power connector are both available
for CPUFAN1.
•
•