3-19
BIOS Setup
MS-98H4
Power
▶
Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off] Leaves the computer in the power off state.
[Power On] Leaves the computer in the power on state.
[Last State] Restores the system to the previous status
before power failure or interrupt occurred.
▶
Deep Sleep Mode
The setting specifies the Deep Sleep power saving mode. S5 is almost the same
as G3 Mechanical Off, except that the PSU still supplies power, at a minimum,
to the power button to allow return to S0. A full reboot is required. No previous
content is retained. Other components may remain powered so the computer can
“wake” on input from the keyboard, clock, modem, LAN, or USB device.
** Advanced Resume Events Control **
▶
USB from S3/S4
The item allows the activity of the USB device to wake up the system from S3/
S4 sleep state.
