42
2
Hardware Installation
Universal Serial Bus Connectors
USB 5-6
W
The system board supports 6 USB 2.0/1.1 ports. USB allows data
exchange between your computer and a wide range of
simultaneously accessible external Plug and Play peripherals.
Four onboard USB 2.0/1.1 ports (Black) are at locations CN5 (USB
1-2) and CN3 (USB 3-4) of the system board.
The JUSB1 connector (USB 5-6) allows you to connect 2 additional
USB 2.0/1.1 por ts. The additional USB ports may be mounted on a
card-edge bracket. Install the card-edge bracket to the system
chassis then inser t the connector that is attached to the USB port
cables to JUSB1.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu
(“Onboard Device” section) of the BIOS. Refer to chapter 3 for
more information.
W
W
USB 4
USB 3
USB 2
USB 1
1
2
1 0 9
VCC
VCC
-Data
-Data
+Data
+Data
Ground
Ground
N. C.
Key
