manualshive.com logo in svg

Rosch Computer G4V506-P, Руководство пользователя

Поделиться
Скачать
Rosch Computer G4V506-P Скачать руководство пользователя страница 84

84

3

Award BIOS Setup Utility

3.1.7  PC Health Status

The settings on the screen are for reference only. Your version may not be identical
to this one.

3.1.7.1

Current  System Temperature,  Current  CPU Temperature,
Current System Fan Speed, Current CPU Fan Speed and Cur-
rent 2nd Fan Speed

These fields will show the internal temperature of the system, cur-
rent temperature of the CPU, and the current fan speed of the sys-
tem, CPU and 2nd fans in RPM (Revolutions Per Minute).

3.1.7.2  CPU(V)

This field will show the voltage of the processor.

3.1.7.3  +1.5V, +3.3V, +5V, +12V, -12V, VBAT(V) and 5VSB(V)

These fields will show the output voltage of the power supply.

Note:

The onboard hardware monitor function is capable of detecting
“system health” conditions but if you want a warning message
to pop-up or a warning alarm to sound when an abnormal
condition occurs, you must install the Hardware Doctor utility. This
utility is included in the CD that came with the system board.
Refer to the Hardware Doctor section in chapter 4 for more
information.

Содержание G4V506-P


















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды