![Rorke Data Galaxy A16F-G2422 Скачать руководство пользователя страница 22](http://html1.mh-extra.com/html/rorke-data/galaxy-a16f-g2422/galaxy-a16f-g2422_installation-and-hardware-reference-manual_1486218022.webp)
Galaxy Raid Installation and Hardware Reference Manual
1-8
GALAXY Components
♦
COM ports
: The controller module comes with two (2) COM ports.
One port,
COM1
, is used for accessing the controller-embedded
configuration utility through the network that allows you to configure
and monitor your array and upgrade firmware over a VT-100 terminal
emulation program running on a management computer. An audio
jack to DB9 cable is shipped with your subsystem to facilitate the
connection.
The second COM port, marked as
COM2
is for uninterruptible power
supply (UPS) connection. An optional audio jacks to DB-9 serial
communication cable is available for purchase. Please refer to
Appendix A
for instructions on connecting a UPS.
♦
Ethernet ports
: The controller module on the GALAXY comes with a
10/100M Ethernet port used for remote management through the
network. Shielded cables must be used to protect against emissions.
Connect the other end of the Ethernet cable to a LAN hub port of the
local network.
♦
LED indicators:
Each controller board rear panel comes with eight (8)
LED indicators (labeled from
1
to
6
and from
A
to
B
). Please refer to
Chapter 3
for information on how to monitor your subsystem using
the LED indicators.
♦
Levers:
Two (2) levers located on the sides of the controller board
rear panel provide easy controller module installation and secure the
controller module in place.
♦
Drive
: All models come with sixteen (16) SATA drive channels that
are interfaced through board-to-board connectors to subsystem back
plane. (
NOTE: Drive interfaces are not accessed through the
controller module rear panel.
)
1.2.5 DIMM
Modules
The controller module comes with a pre-installed 256MB capacity or above
DDR RAM DIMM module and can support capacities up to 2GB. The
DIMM module is placed in an easily accessed location on the controller
board. However, when the DIMM module is being changed, the controller
module must be removed from the subsystem chassis.
Содержание Galaxy A16F-G2422
Страница 42: ...Chapter 2 Hardware Installation 2 13 ...