20
TF 200.01.0018_ENG
5.1.2 Operation of the bed guards
Vario is not supplied with bed guard as standard. This can be ordered as an accessory.
To operate the bed guards, pull the rubber tubing placed under the tabletop to release the locking
mechanism. The bed guard can then be pivoted to the desired mode.
Warning!
Make sure that the bed guard is locked securely in place when in use. Locking is checked
by shaking the bed guard back and forth ensuring that the locking pin is fully engaged.
5.1.3 How to fold changing bed up and down
The worktop can be secured against inadvertent folding in upright position by locking the table with the
locking pin.
For folding the worktop in downwards position, remove locking pin and lower top by hand.
Note!
Prior to folding worktop in upright position, bed guard must be turned underneath worktop.
Warning!
Always make sure worktop is securely locked in upright position with locking pin.when left in
this position. Check shower bed is locked by pulling the worktop to ensure locking pin is
fully engaged and worktop cannot be lowered.
