Ropox Hudson 40-25023, Руководство пользователя, Инструкция по монтажу

Страница: 19 / 28

Page 19
Electrical components
Wire diagram
The shower bed is delivered with the control box already mounted on the frame.
The diagram shows how the cables which are connected to the control box.
All the plugs are water tight, and therefore
they can be a little tricky to connect /
disconnect. Make sure that the plugs are
positioned correctly before they are pushed
into the sockets at the control box. The plugs
must be pushed into the sockets until the “O-
ring” is no longer visible.
Motor, control box and control switch apply to
IP66. This means that they are dust tight and
protected against heavy seas, or powerful jets
of water.
The electronic system is designed for periodical
use only, this means a max. duty cycle of 10%;
2min on /18min off.
1. Control box
2. Mains cable 230V
3. Motor, connects to socket 1
4. End plugs, connects to socket 2, 3 & 4
5. Hand control, connects to HB socket
4
5
1
2
3