Page | 8
TF 200.01.0040_ENG
5.1
Electrical component diagram
The included cables must be mounted in accordance with the following diagram.
5.2
Mounting the control
a) Pull cable through hole in fascia and connect the control, via the control cable, to the control box
b) Carefully remove the protection paper, on the back of the press pad, while keeping your finger
between the cable-
ribbon and the adhesive, as these mustn’t stick to each other
c) Place the press pad on the fascia
Notice!
Remember to activate the battery after mounting it in the docking bay, by pressing the
battery status button.
Notice!
If the cable-ribbon sticks to the adhesive, the control may be destroyed.
