Page | 6
TF 200.01.0040_ENG
Button for
battery status
3.4
Intended population
Anyone who can find use in having a tabletop or workstation with an adjustable height.
3.5
Intended operator
Anyone who has read and understood this manual can use the product. However, children over the age of 8
may only use the product under the supervision of an adult.
3.6
Basic safety
A 4Single Frame can be bought with a safety-strip, which must be mounted on the fascias. This
way, collisions, and the danger of entrapment is reduced. It is always recommended to buy a
safety-strip.
The safety-strip ensures that any collision with people or objects along the fascias are registered.
When the safety-strip registers something, it stops the table, and retracts by 1-2cm / 0.4-0.8in.
4.
Charging the battery
Battery status can be checked by pressing the status-button. The LEDs will turn on, and the greater the
charge, the greater the number of LEDs will turn on.
Battery status
Batter status button is pressed.
LEDs light up for 3 seconds.
➢
100 - 76%
4 LEDs on
➢
75 - 51%
3 LEDs on
➢
50 - 26%
2 LEDs on
➢
25 - 11%
1 LED on
➢
10 - 0%
1 LED flashing
If the buzzer on the battery sounds twice for 0.5 seconds, when the status-button is pressed, it means that
the battery has less than 25% charge. At this point, it is recommended to recharge the battery.
The battery should be charged about once every 14 days, depending on usage, with heavy loads and
frequent use typically requiring more frequent charging.
A charger is included with the battery as standard, with the following properties:
➢
Micro-USB type B
➢
5 V DC / 2.4A / 12W
Warning!
Charging during a thunderstorm, or other power surges, you risk serious injury or
potentially death, due to electric shock.
Charging the battery with an incompatible charger can lead to serious injury or potentially
death, due to the fire hazard of overheating.
