12
TF 200.02.0012_eng
4.2 Installation of product
The bathtub is delivered as an assembled unit. Place the bathtub and adjust the four setscrews of the feet to
make sure that the bathtub is horizontal. Connecting the product to mains, as well as water supply and drain
hoses, makes it operational.
Warning!
Before use always make sure that mains cable and hand control cable will be able to
travel freely without the risk of squeezing or disconnecting the product as result of the
movement.
Caution!
When connected to the mains the product must be placed in a manner according to
power outlets so that the operator will be able to disconnect the product during use in
case of an emergency.
Caution!
Do not perform installation or transfer the product between locations of use while the
bathtub is filled with water.
